HOME SERVICES PROJECTS STORE ARCHIVES LINKS THE ACE TEAM JURCA PLANS CONTACT US
Marcel Jurca Plans West


The MJ-8 is a 75% scale plans built replica of the famous German fighter of WWII, the Focke-Wulf Fw-190 Würger.  The plans show details for duplicating two different variants of the Fw-190 which both include the option for tandem two place seating.  The replica is powered by any radial engine from 200 to 400 Hp up to one meter in diameter or a six cylinder opposed aircraft engine.  The airframe was designed for positive six and negative four G loading.  Average construction time is between five to eight thousand hours.  Like all Jurca designs the MJ-8 Würger has been professionally stress analyzed.

Basic structure consist of a 4130 steel tubular fuselage frame with aluminum bulkheads, stringers and skin.  The wings main spar is built as a one piece laminated box spar structure.  The wings, and tail group are covered with a thin plywood veneer and surfaced with a fiberglass cloth.  All other components such as the cowlings, wing fillets, gear doors, gun fairings, etc. are built with fiberglass.  All fuselage formers and wing ribs are shown full scale on the plans so they can be traced directly onto the material for easy cut-out.

Wing Span............... 24.00 ft.
Wing Area................ 112.0 sq. ft.
Length...................... 29.33 ft.
Max Gross Wt.......... 2500 lbs.
Empty Wt................. 1700 lbs.
Payload (Full Fuel).. N/A
Fuel Capacity.......... 50 gal.
Seats........................ 1
Cabin Width............. N/A
Range.......................... 500 sm.
Takeoff Dist................ 1200 ft.
Landing Dist............... 1800 ft.
Vmax........................... 330 mph
VCr............................... 225 mph
VStall Clean................ 65 mph
VLand Config.............. N/A
Climb Rate @MSL...... 2500 fpm
Service Ceiling........... 15,000 ft.

$750.00
Place Order



The MJ-100 is a 100% scale plans built replica of the famous German fighter of WWII, the Focke-Wulf Fw-190 Würger.  The plans show details for duplicating two different variants of the Fw-190 which include tandem two place seating.  The replica is powered by the mighty P&W R1830 radial aircraft engine.  The airframe was designed for positive six and negative four G loading.  Average construction time is between eight to ten thousand hours.  Like all Jurca designs the MJ-80 Würger has been professionally stress analyzed.

Basic structure consist of a 4130 steel tubular fuselage frame with aluminum bulkheads, stringers and skin.  The wings main spar is built as a one piece laminated box spar structure.  The wings, and tail group are covered with a thin plywood veneer and surfaced with a fiberglass cloth.  All other components such as the cowlings, wing fillets, gear doors, gun fairings, etc. are built with fiberglass.  All fuselage formers and wing ribs are shown full scale on the plans so they can be traced directly onto the material for easy cut-out.

Wing Span............... 34.42 ft.
Wing Area................ 196.9 sq. ft.
Length...................... 29.5 ft.
Max Gross Wt.......... 5100 lbs.
Empty Wt................. 4000 lbs.
Payload (Full Fuel).. N/A
Fuel Capacity.......... 150 gal.
Seats........................ 1-2
Cabin Width............. N/A
Range.......................... 500 sm
Takeoff Dist................ 1200 ft.
Landing Dist............... 1800 ft.
Vmax........................... 350 mph
VCr............................... 250 mph
VStall Clean................ 70 mph
VLand Config.............. N/A
Climb Rate @MSL...... 3000 fpm
Service Ceiling........... 30,000 ft.

$1500.00
Place Order



HOME | SERVICES | PROJECTS | STORE | ARCHIVES | LINKS | THE ACE TEAM | JURCA PLANS | CONTACT US